As a DIY enthusiast or DIY enthusiast, a grout remover can help you in many ways. You can use it to remove worn-out grout during renovations or repairs.
Also, some limescale removers are gentle on fabrics, so they can help you remove limescale stains from your clothes.
The best thing about these formulas, however, is that they make the job easier, as you don't have to scrub the surfaces intensely when removing the old putty.
Also, grout removers are easy to use, as you just need to apply the compound to the grout and let it sit for a while before removing the residue.
Because there are so many formulas to choose from, we've provided you with a detailed ranking list highlighting some of the high quality caulk removers you can buy.
11 Best joint remover
1. Goo Gone Pro Power Adhesive Remover
Goo Gone Pro is an all-purpose adhesive remover that is effective on a wide range of compounds, including caulk.
This product is formulated with powerful ingredients to help you get the job done in minutes.
Plus, it contains citrus fruits and powerful refined oils that can break up almost any type of stain or sticky residue.
In addition, it is very easy to use and the instructions are simple, so you don't waste a lot of time removing grout from surfaces.
In fact, the formula reveals its full effect about ten minutes after application. Plus, you can apply it to a variety of surfaces without damaging or discoloring the material being cleaned.
Therefore, you can use this grout remover on painted surfaces, painted wood, fabric to name a few.
However, you should do a patch test on the material you want to remove the caulking from.
This formula can be particularly helpful when dealing with silicone caulk or other professional-grade adhesives.
To make your job easier, you should apply the remover before the putty dries. This allows you to remove the stain more quickly without applying the stain remover in large amounts.
After the stripper dissolves the grout, you can wash off the resulting residue with water and your favorite detergent.
For the user's safety, the manufacturer has placed instructions on the back label, so please follow the instructions before using the product.
- safe on the surface
- fast acting formula
- Good quality
- Not ideal for some surfaces.
2. Orange Sol 10022 Contracting Solvent
Like the previous grout remover, this product can be used on a variety of surfaces. The most amazing thing is that you can use it to remove putty from your hands, clothes, hair, etc.
However, care should be taken when applying this formulation to the skin, especially if you are not sure whether you are allergic to it or not.
The ingredients used in the making of this product are of the highest quality, so you can be confident that any sealant stains will be effectively removed.
In addition, it comes in a practical spray bottle that simplifies your work during application. This allows you to apply the compound to the exact area you want to clean, limiting waste.
The solvents in this formula are resistant to limescale stains but gentle on surfaces, so don't expect this product to damage the items being cleaned.
And the fact that it's non-corrosive makes it even more reliable as you don't have to worry about a thing when removing grout from surfaces.
If security is your main concern, this might be the product for you. It's free of toxic compounds, so you can apply it to virtually any surface indoors or out.
To top it off, this product is a fast-acting formula that makes it even more reliable.
- environmentally friendly
- Not dangerous
- Easy to use
- The citrus scent may irritate some users.
3. DAP Gasket Remover
DAP's petroleum-based caulk remover is a fast-acting compound designed specifically for your needs.
That said, you can soften dry dough in under two hours, making your job a whole lot easier.
To make it even better, it can remove different types of caulking formulas, so no matter if the compound you want to remove is silicone or latex based, this product will remove it with maximum efficiency.
You can also use it to remove other types of surface seals. The formula softens old caulk for quick and easy removal, so you won't have trouble scraping off the residue.
The tube is equipped with an easy-to-use applicator tip that allows you to apply the right amount of product.
Consequently, the gel does not overlap adjacent surfaces unless you apply excessive amounts.
This grout remover is friendly to most surfaces but care must still be taken when removing grout from finished areas as there is a chance it will react with some paint products. The tube has a built-in hanging hole for you to use during storage.
- It has a fresh scent
- It can be used both indoors and outdoors.
- It may damage some surfaces.
4. 3M Gasket Remover
When you plan to apply new grout, this scraper can effectively help you remove worn grout, leaving the surface clean.
And because it's a well-known brand in the formulation of caulk removers, you can buy this product knowing it will remove all caulk in just one application.
The formula can penetrate even the hardest layer of grout, so you can rely on it when removing old grout.
Unlike most strippers, this compound not only softens but also dissolves the caulk, leaving no big residue behind.
You still need to clean the surface so the new gasket can adhere firmly to the surface to be sealed.
The good thing about this formula is that you can easily clean it with soap and water. In addition, the sealer remover comes in a squeeze bottle and also has a flip-top lid that allows for hassle-free application.
This product can be applied to external and internal surfaces. When removing grout from exterior surfaces, be sure to do so when it is not raining, as moisture can make the formula less effective.
When used correctly, this product can help prepare surfaces with minimal effort as it leaves the surface sealant-free after cleaning is complete.
- easy to use
- The formula works fast.
- Removes all types of dough
- It needs time to take full effect.
5. FG658 Goof Off Professional Power Remover
This is also another formula to use when removing tough grout stains from surfaces.
However, it can also help you prepare surfaces for new putty. The fact that it comes in a spray can makes application very easy.
Also, you can buy this product in packages as per your needs. Once applied, the ingredients work on the grout stain and smooth it out.
This allows you to easily remove the sealant with a scraper. With this product you can remove all sticky dirt from surfaces without having to scrub intensely.
When you buy this product, you get three sprays for grout removal that will serve you for a long time, depending on the frequency of use and the size of the area to be treated.
For your own safety, wear solvent resistant goggles and gloves during application. Also, do not spray into the wind when removing grout outdoors.
You can spray the formula directly when cleaning concrete, glass, metal, brick and other surfaces.
However, in some areas it may be necessary to apply the product to a cloth, after which you can rub it on the surface to be cleaned.
The formula works in both scenarios, so you just have to make sure you're applying it correctly.
- At the speed of lightning
- highly flammable
6. MXY gel putty remover
Easily remove grout from surfaces with this premium formula. This product is suitable for users who want to remove grout from a small area.
As such, it can help you remove caulking from your bathtub, shower, sink, and other surfaces in your home.
Furthermore, the formula is gel-based and also comes in a practical applicator tube that allows you to apply the compound with exact precision.
This means that the remover only goes where it is needed. Before applying this product to any surface, ensure the area is clean and free of moisture as this will maximize the cleaning effect.
In addition, the formula is also effective against mold and mildew, making it one of the best grout removers you can use to clean surfaces before applying new grout.
As the gel is very viscous, it does not run even when applied vertically, which means that the surface to be cleaned does not get dirty.
After using the product, be sure to close the cap tightly to prevent the formula from drying out.
- quick application
- Good quality
- Does not dissolve putty compared to most formulas.
7. Rust-Oleum Krud Kutter Adhesive Remover 302815
Rust-Oleum brings you an ultra strong adhesive remover that simplifies your job by removing dry, sticky grout.
With this formula you can remove grout from solid surfaces, fabrics and other objects.
The solvents that make up this formula are very effective and ensure that the dough breaks down quickly.
In addition, the spray bottle saves a lot of time when removing grout in a large area.
Although strong, this product will not stain the area being cleaned provided it is applied to the correct material. That said, there are some materials this joint remover cannot work on.
According to the manufacturer, Krud Kutter should not be applied to leather, lacquer, silk, suede and other elastic materials such as rubber.
You can use this product when working with silicone, latex, and other types of acrylic caulk.
This limescale remover is very easy to work with as you just need to apply it on the affected area. When removing dry or hard caulk, you should wait five minutes for the formula to soften the caulk.
After that, you can peel, clean or scrape the dough, depending on the material to be cleaned. However, it can smooth out light blemishes within two minutes.
- non corrosive
- professional qualification
- It does not dissolve the resulting residues.
8. Motsenbocker 41116 Removable Gasket Remover
Removing grout from surfaces can be a challenging task, but that's not the case when you use this premium Motsenbocker formula.
Like most of the formulas we've seen, this product comes in a spray bottle for easy use.
The solvents in this product work by breaking molecular bonds, allowing for easy removal of the sealant.
To avoid damaging surfaces, be sure to test the product in a small spot before fully applying it.
This formula is water-based, so you can easily wipe it off when you're done scraping the grout. Plus, it breaks the caulk into smaller pieces so you don't have a hard time rinsing off the residue.
You must wait at least four minutes before removing the grout from the surface. Plus, this formula is surface-safe, so it can be applied to a variety of materials.
It can also be used to remove other construction adhesives from surfaces. Thanks to its fast-acting function, this formula allows you to treat a large area in a limited time.
This product is safe for shower tile, baseboards, porcelain, and more. As such, you can use it when tackling renovation or repair projects around your home and on a commercial scale.
- multi surface
- environmentally friendly
- Low VOC ingredients
- leaves residue
9. Crown Tuff Strip Ultimate Gasket Remover
This product was specifically designed to remove old caulking, so you can rely on it when removing caulking surfaces.
No prep is needed when using this formula, so you can apply it directly to the surface to be cleaned.
The bottle has a uniquely designed applicator cap that allows you to apply the compound to the area covered by the caulk.
This product does not dissolve the grout, but weakens it. Consequently, users can take out the dough with the greatest of ease.
In addition, the bottle is designed so that you can easily squeeze the contents without spilling anything.
Additionally, the formula can adhere to vertical surfaces, allowing it to remain on the grout for the recommended time. This increases the absorption rate.
This, in turn, causes the mass to dissolve. In addition, the product removes the seal in just two hours.
However, you will have to manually scrape the dough off as the formula only separates it from the surface.
All in all, Tuff Strip Caulk Remover is an amazing formula that lets you work smart, not hard, when removing grout from hard surfaces.
- easy removal
- Not suitable for epoxy coated surfaces.
10. McKanica Silicone Gasket Remover
If you have a small surface area to treat, this grout remover can be a great option. Safe for multiple surfaces, the product can be used to remove grout from fiberglass, ceramics and most plastics.
It can also be easily applied to some aluminum surfaces. However, anodized and colored aluminum should be avoided as solvents can discolor or damage the surface of the material.
The product comes with an applicator that allows you to apply the formula precisely without spreading the gel on the uncaulked areas.
Since the formula is in gel form, you can easily apply it along a straight line without missing a spot.
However, make sure the gel does not come into direct contact with the skin. The cleaning process is also very easy as users can easily remove the gel and residue after the compound has completely broken down the mass.
To increase effectiveness, the formula should only be applied to dry surfaces. This allows solvents to penetrate the sealant more quickly, allowing for effortless removal.
- little smell
- alta performance
- Easy-squeeze applicator tube
- Putty takes a long time to soften
11. Citric Base for 3M Adhesive Remover
3M Caulk Remover can safely remove caulk without damaging the base material.
This formula is free of chlorinated substances, so it does not harm the part being cleaned.
Additionally, the nozzle allows for precise application when removing putty from a small section.
Because the aerosol can is under high pressure, you can effortlessly apply the formula to hard-to-reach areas.
Additionally, the formula can be used to clean surfaces prior to grouting. The old putty is completely removed, allowing the new layer to easily adhere to the surface.
The formula is based on citrus fruits, so your surface is not only clean, but also fresh. It can achieve most of its functions with the help of strong solvents included in the formula.
If you are looking for a grout remover to use on light grout stains, this product may end your search.
As the manufacturer values quality, the ingredient list only consists of high-quality solvents that are not only resistant to glue stains, but also reliable.
- Not petroleum based
- Cleans a variety of stickers.
- clean gently
- Does not work on all types of dough.
When should I use a limescale remover?
Joint removers can come in handy in a number of different situations. As such, you can use them to remove old grout from any solid or fabric surface.
However, this can vary depending on the formulation used, as some compounds are formulated with ingredients that are not suitable for textiles.
Some formulations are soft to the touch, so you can use them to remove putty patches from your skin.
However, care should be taken when using these formulas as some can irritate the skin.
Do limescale removers damage the paintwork?
Gasket removers are formulated with different ingredients, so some may damage the paint while others may not.
Therefore, always read the label before applying the sealant. You should also consider testing the product for color matching in an inconspicuous area.
How does a limescale remover work?
Simply put, caulk removers are formulated with powerful solvents that break the molecular bonds in caulk.
This will make the dough softer and also more pliable, allowing for easy disposal.
Can a caulk remover soften cured caulk?
Yes, most caulk removers contain powerful ingredients that can effectively break down cured caulk, leaving a slick residue that can be easily washed away.
If you're having a hard time removing grout from surfaces, it's time to try the grout removers mentioned above.
The list contains a variety of high quality formulas that will simplify your dry and wet caulk removal job.
So all you have to do is choose the grout remover that fits your needs and budget.